Fighting COVID-19, TL-D3 Pro USD $100 OFF for USA, Tenlog 3D STAND WITH YOU!
This is really a difficult time, both for you and us. We
want to do our best to help you fight COVID-19, Wish you the best health!
Our American promotion is coming,
TL-D3 Pro USD $100 OFF
This promotion will end on September, 1st, 2020
Send from CA, USA warehouse in 1 day, 2-4 days to arrive!
Free shipping and free customs!
Order Here, https://shop.tenlog3d.com/productinfo/436631.html
Tenlog IDEX 3D Printer can print 4 Goggles Bracket at same
time.
Here are some tips of Cura for TL-D3 Pro Independent Dual
Extruder 3D Printer,
1.Download the stl of Goggles Bracket from Tenlog's Google Drive
2.Multiply Selected Model to 3 Copies
Move them to the right place, like this,
Note: Don’t let them touch each other
3.Write down the X coordinates
of the first model on the left, ours is -86
4.Write down the X coordinates
of the rightmost model, ours is 86
5. Calculate the distance between the first model and the fourth
model as 86-(-86)=172, We need 3 spaces in total for 4 models, so each space is
172/3≈57.33mm(Write down this important value, used
for step 9)
6. So the X coordinate value of
the second model is -86+57.33≈-28.7
Enter -28.7 into the X coordinate of the second model
7.So the X coordinate value of
the third model is -86+57.33+57.33≈28.7
Enter 28.7 into the X coordinate of the third model
8.Check the four models again to
make sure they do not overlap
Then delete the two models on the right
9. Slice and Save Gcode, Open Gcode, put the code “M605 S2 X114.7” in
the First line
The value of X represents the distance between Nozzle 1(E1)
and Nozzle 2(E2)
The 114.7 is the distance between model NO. 1 and Model NO.
3(Come from step 5, 57.33*2≈114.7)
10. Save the modified gcode to the SD card, select the Duplication
Printing mode on the printer screen, and start printing. After printing, you
will get 4 models.
评论
发表评论